Lifeboat Foundation

Scientists in Taiwan demonstrated a new way to produce high-purity lead-iodide, as a precursor material for a perovskite solar cell. By using temperature to better control the orientation of crystals, the group was able to show much higher efficiencies when the precursor was used to fabricate a perovskite layer and subsequently a working solar cell.

“It’s the stupidest thing ever,” Elon Musk said several years ago.

European Space Agency’s (ESA) director general has proposed the development of Europe’s first space-based solar power system to be constructed in 2025.

ESA, an intergovernmental conglomerate of 22 member states, will decide on the director’s plan in November this year, according to a report published in Ars Technica.

Continue reading “Europe is seriously considering a major investment in space-based solar power” »

Simply put, we need a reliable and secure energy grid. Two ways to ensure continuous electricity regardless of the weather or an unforeseen event are by using distributed energy resources (DER) and microgrids. DER produce and supply electricity on a small scale and are spread out over a wide area. Rooftop solar panels, backup batteries, and emergency diesel generators are examples of DER. While traditional generators are connected to the high-voltage transmission grid, DER are connected to the lower-voltage distribution grid, like residences and businesses are.

Microgrids are localized electric grids that can disconnect from the main grid to operate autonomously. Because they can operate while the main grid is down, microgrids can strengthen grid resilience, help mitigate grid disturbances, and function as a grid resource for faster system response and recovery.

A perovskite solar cell developed by engineers at the University of California San Diego brings researchers closer to breaking the ceiling on solar cell efficiency, suggests a study published Aug. 10 in Nature.

The new solar cell is a lead-free low-dimensional perovskite material with a superlattice crystal structure —a first in the field. What’s special about this material is that it exhibits efficient carrier dynamics in three dimensions, and its device orientation can be perpendicular to the electrodes. Materials in this particular class of perovskites have so far only exhibited such dynamics in two dimensions—a perpendicularly orientated solar cell has never been reported.

Thanks to its specific structure, this new type of superlattice solar cell reaches an efficiency of 12.36%, which is the highest reported for lead-free low-dimensional perovskite solar cells (the previous record holder’s efficiency is 8.82%). The new solar cell also has an unusual open-circuit voltage of 0.967 V, which is higher than the theoretical limit of 0.802 V. Both results have been independently certified.

Solar cells based on organic molecules offer potential advantages over conventional devices for converting light into electricity. These organic solar cells could be inexpensive, durable, and easy to make. However, organic cells do not yet have the performance that matches conventional devices. Scientists’ efforts to improve performance have been limited by their limited understanding of how electrons excited by light (or “photoexcited”) become “free carriers.”

In principle, free carriers flow across a material and emerge as an electrical current. Prior scientific studies suggest that photoexcitation leads to a tightly bound pair consisting of an electron and a hole. These studies did not describe how to overcome the strong binding forces to form free carriers. This new study reveals that more sites on neighboring molecules can accept electrons, explaining how free carriers form directly.

Published in Materials Horizons, this research developed a new model called Distribution Range Electron Transfer (DRET). Previous models for the generation of free carriers in organic solar cells have generally invoked new physical phenomena to explain experimental results. In particular, they have said that free carriers can form with efficiency that approaches 100% in a material where opposite charges are traditionally difficult to separate and use.

Adding a molecule normally used in detergent to an infrared LED could make devices that are easier to manufacture, require less energy and display richer colours than existing ones.

Solar cells and LEDs made from perovskite, a titanium and calcium crystal, have long held promise as being more efficient and easier to produce than commonly used silicon-based devices, but making them both stable and efficient enough to rival silicon’s commercial success has proved difficult.

What gives humans the advantage over our incoming robot masters? Junaid Mubeen at New Scientist Live this October.

Scientists in Australia have demonstrated a new way to apply a passivating contact layer to silicon cells. They produced an n-type cell with aluminum-titanium passivating contact and 21.9% efficiency, and claimed the technique could open up new possibilities for the use of transition metal oxides in cell passivation.

Bill Gates-founded Breakthrough Energy Ventures co-led a $44 million funding round for a startup that aims to accelerate solar far construction.

Breakthrough Energy Ventures, a climate change solution-focused VC firm backed by the likes of Bill Gates, has joined a $44 million backing of solar startup Terabase Energy, a press statement reveals.

Continue reading “Bill Gates-backed startup is using robots to build enormous solar farms” »

The electrification of heating systems could play a significant role in building decarbonization. Heat pumps are emerging as a solution.

Iranian scientists have demonstrated a multi-layer silicon nanoparticle (SNP) solar cell based on nanoparticles that are densely stacked inside a dielectric medium. They considered different SNP structures and configurations to tailor these particles as a p–n junction cell.