Lifeboat Foundation

In a paper to be published in the forthcoming issue in NANO, a team of researchers from the School of Chemistry and Chemical Engineering at Hunan University of Science and Technology have proposed a novel strategy for the synthesis of non-precious metal catalysts in zinc-air batteries that do not compromise its electroactivity, affordability and stability.

As a green and sustainable energy generator, zinc-air battery has attracted great attention from researchers due to its high specific energy, high current density, low cost, and environmental friendliness. Yet it is not without its drawbacks. The slow oxygen reduction reaction (ORR) of its cathode has become an obstacle to its commercial application. One possible solution is to use platinum (Pt) and Pt-based catalysts, but its high cost and scarce availability make it less ideal. In addition, alkaline KOH (or NaOH) is generally used as the electrolyte, but it leads to the generation of carbonates (CO₃^2-) due to the dissolution of CO₂ in the electrolyte as well as the spontaneous corrosion of the anodic zinc in strong alkaline media. This has the effect of slowing down the ionic conductivity of the electrolyte and battery life. Therefore, a neutral electrolyte should be used instead.

Professor Brian Cox explains the process that causes all stars, including eventually our own sun, to die.

Stars are only able to survive as long as they have a supply of hydrogen to burn.

Our star, the Sun, will run out of fuel in about a billion years.

Continue reading “Physics KS3 / GCSE: Death of the Sun and stars” »

O,.,0.

Despite its diminutive size, the creature still managed to pack a lot of nightmare fuel. Those 45 tentacles were used to snatch up food, creep along the ocean floor and scare off predators.

Oh, and those “tubes” also had their own armor.

Continue reading “Scientists Discover Ancient ‘Cthulhu’ Fossil That Will Give You Nightmares” »

Lithium batteries are what allow electric vehicles to travel several hundred miles on one charge. Their capacity for energy storage is well known, but so is their tendency to occasionally catch on fire—an occurrence known to battery researchers as “thermal runaway.” These fires occur most frequently when the batteries overheat or cycle rapidly. With more and more electric vehicles on the road each year, battery technology needs to adapt to reduce the likelihood of these dangerous and catastrophic fires.

Researchers from the University of Illinois at Chicago College of Engineering report that graphene—wonder material of the 21st century—may take the oxygen out of lithium battery fires. They report their findings in the journal Advanced Functional Materials.

The reasons lithium batteries catch fire include rapid cycling or charging and discharging, and high temperatures in the battery. These conditions can cause the cathode inside the battery—which in the case of most lithium batteries is a lithium-containing oxide, usually lithium cobalt oxide—to decompose and release oxygen. If the oxygen combines with other flammable products given off through decomposition of the electrolyte under high enough heat, spontaneous combustion can occur.

Continue reading “Graphene coating could help prevent lithium battery fires” »

Natural gas and biogas have become increasingly popular sources of energy throughout the world in recent years, thanks to their cleaner and more efficient combustion process when compared to coal and oil.

However, the presence of contaminants such as carbon dioxide within the gas means it must first be purified before it can be burnt as fuel.

Traditional processes to purify natural gas typically involve the use of toxic solvents and are extremely energy-intensive.

Continue reading “Novel membrane material removes more impurities without the need for toxic solvents” »

A century after Nikola Tesla’s famous Wardenclyffe tower was dismantled, the legacy of the world’s greatest inventor lives on in the form of a new project which aims to develop wireless power transmission and a host of other communications and energy functions.

Strikingly similar to the Wardenclyffe tower, a new facility has gone up along a major transit route in the town of Milford, Texas. Built and operated by a company called Visiv Technologies, the tower is designed for precisely the same functions as the original Tesla tower, that is, for wireless communications and the transmission of electricity through air via low-frequency radio waves known as ‘surface waves.’

Continue reading “Tesla’s Wireless Energy Technology Being Revived in Texas” »

SpaceX is half a day away from the planned launch debut of Falcon Heavy Block 5, a milestone that will also be the rocket’s second launch ever and first mission with a commercial payload.

First and foremost, Falcon Heavy’s job is to safely place the Saudi Arabian communications satellite Arabsat 6A into a high-energy geostationary transfer orbit (GTO) more than 35,000 km (~22,000 mi) above Earth’s surface. Despite the satellite weighing no less than 6000 kg (13,200 lb), Falcon Heavy will still have enough latent performance to attempt the recovery of all three of its new Block 5 boosters. With any luck, this will hopefully return SpaceX’s East Coast landing zones (LZ-1 and LZ-2) to successful operations after an anomaly in December 2018 caused Falcon 9 B1051 to landing a mile or so offshore.

Continue reading “SpaceX to livestream Falcon Heavy Block 5 launch debut at 6:15pm ET today” »

We already recover power from the wheels of some cars when slowing. Kinetic energy recovery systems (KERS) have been used in Formula One racing to store energy in a flywheel when braking, and then push it back to the wheels later for a boost in speed. Electric cars often use regenerative braking, which converts the speed of the wheels into electrical power to recharge the battery. These systems are a great way to increase efficiency, but like everything in the Universe, they are not 100 per cent efficient. Sadly, the laws of physics prohibit the existence of true perpetual motion, so it’s the best we can do.

Electrochemical energy systems—processes by which electrical energy is converted to chemical energy—are at the heart of establishing more efficient generation and storage of intermittent energy from renewable sources in fuel cells and batteries.

The powerhouse substances known as catalysts, which are used to accelerate chemical reactions, are key players in these systems. The size and efficiency of fuel cells, for example, could greatly benefit from using high-performance catalysts.

Producing better catalysts is easier said than done, however. A catalyst’s usefulness is partially based on the amount and quality of its active sites, due to the sites’ specific geometry and electronic properties. Engineering these sites can be an arduous, inefficient process.

Continue reading “Researchers provide new method to boost clean energy research” »